ebm-papst AB

Modelos enebm-papst AB CatalogCompact fansDC Axial Fans
Resultados 21-30 de 50
Resultados por página:
Proveedor
Descripción
172 x 150 x 51 mm


General characteristics:
– Material: aluminium housing, fiberglass-reinforced PA impeller; housing with grounding lug
for screw M4 x 8 (Torx). 48 V version incl. screws.
– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection with flat pin terminals 3 x 0.5 mm.
– Blowing over struts. Rotational direction CCW looking at rotor.
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
415
Agregado el
7 ene., 2011
Proveedor
Descripción
172 Ø x 51 mm

– 3-phase fan drive high degree of running smoothness.
– Highly stable characteristic curve for high air flow with high back pressure.
– Low operating noise at high back pressure.

– Standard with PWM control input and speed signal, additional inputs and outputs on request.

General characteristics:
– Material: aluminium housing, fiberglass-reinforced PA impeller; housing with grounding lug for
s
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
370
Agregado el
7 ene., 2011
Proveedor
Descripción

140 x 140 x 51 mm

– 3-phase fan drive high degree of running smoothness.
– Highly stable characteristic curve for high air flow with high back pressure.
– Low operating noise at high back pressure.



– Standard with PWM control input and speed signal, additional inputs and outputs on request.
General characteristics:
– Material: aluminium housing, fiberglass-reinforced PA impeller; housing with grounding lug
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
462
Agregado el
7 ene., 2011
Proveedor
Descripción
119 x 119 x 38 mm – Diagonal compact fan with low noise and high pressure saddle.
– Highly stable characteristic curve for high air flow with high back pressure.

– Optional Vario-Pro: Highly adaptable software configuration of the fan enables
a tailor-made solution to the specific requirements of your applications. General characteristics:
– Material: aluminium housing, fiberglass-reinforced PA impeller; housing with grounding lug
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
176
Agregado el
7 ene., 2011
Proveedor
Descripción
119 x 119 x 38 mm

– Innovative impeller with winglets for low noise.
– Control inputs, alarm and speed signals available on request.



General characteristics:
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 24, TR 64. Stripped and tinned ends.
– Blowing over
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
424
Agregado el
7 ene., 2011
Proveedor
Descripción
119 x 119 x 25 mm

– Highly stable characteristic curve for high air flow with high back pressure.
– Innovative impeller with winglets for low noise.

– Optional Vario-Pro: Highly adaptable software configuration of the fan enables
a tailor-made solution to the specific requirements of your applications.

General characteristics:
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated el

Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
310
Agregado el
7 ene., 2011
Proveedor
Descripción
92 x 92 x 38 mm

– Highly stable characteristic curve for high air flow with high back pressure.
– Innovative impeller with winglets for low noise.



– Optional Vario-Pro: Highly adaptable software configuration of the fan enables
a tailor-made solution to the specific requirements of your applications.
General characteristics:
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated elect
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
934
Agregado el
7 ene., 2011
Proveedor
Descripción
80 x 80 x 38 mm

– Highly stable characteristic curve for high air flow with high back pressure.
– Innovative impeller with winglets for low noise.


– Optional Vario-Pro: Highly adaptable software configuration of the fan enables
a tailor-made solution to the specific requirements of your applications.

General characteristics:
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully int
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
790
Agregado el
7 ene., 2011
Proveedor
Descripción
70 x 70 x 15 mm

– Highly stable characteristic curve for high air flow with high back pressure.
– Low operating noise at high back pressure.

General characteristics:
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 28, TR 64. Stripped and tinned ends.
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
754
Agregado el
7 ene., 2011
Proveedor
Descripción
60 x 60 x 32 mm

– Highly stable characteristic curve for high air flow with high back pressure.
– Innovative impeller with winglets for low noise.

General characteristics:
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 24, TR 64. Stripped and tinned ends
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
469
Agregado el
7 ene., 2011

Información del contacto

Dirección:
Äggelundavägen 2
Järfälla, 175 62
Sweden
Teléfono: +46 10 454 44 00
Correo electrónico:
Sitio Web: www.ebmpapst.se