ebm-papst AB

Modelos enebm-papst AB CatalogCompact fansDC Axial Fans
Resultados 41-50 de 50
< Página anterior12345Página siguiente >
Resultados por página:
Proveedor
Descripción
92 x 92 x 25 mm

– Open loop speed control by means of external or internal temperature sensor.
– Automatic speed adjustment according to cooling requirements.

– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 24, TR 64. Stripped and tinned ends.
– Blowing ov
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
926
Agregado el
20 ene., 2009
Proveedor
Descripción
92 x 92 x 25 mm

– Ball bearings and sleeve bearings available.
– Some models suitable for use at high ambient temperatures to 85 °C.

– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 24, TR 64. Stripped and tinned ends.
– Blowing over struts. Rotational dire
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
1671
Agregado el
20 ene., 2009
Proveedor
Descripción
80 x 80 x 32 mm

– Ball bearings and sleeve bearings available.
– Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications.

– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single lead
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
733
Agregado el
20 ene., 2009
Proveedor
Descripción
80 x 80 x 25 mm

– Open loop speed control by means of external or internal temperature sensor.
– Automatic speed adjustment according to cooling requirements.

– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 24, TR 64. Stripped and tinned ends.
– Blowing ov
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
1948
Agregado el
20 ene., 2009
Proveedor
Descripción
80 x 80 x 25 mm

– Ball bearings and sleeve bearings available.
– Some models suitable for use at high ambient temperatures to 85 °C.
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.

– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 24, TR 64. Stripped and tinned ends.
– Blowing over struts. Rotational direct
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
3021
Agregado el
20 ene., 2009
Proveedor
Descripción
60 x 60 x 25 mm 

– Highly stable characteristic curve for high air flow with high back pressure.
– Motor with very low structure-borne noise.
– Innovative impeller with winglets for low noise.

– Control inputs, alarm and speed signals available on request.
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.
– Protected against reverse polarity and b
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
1894
Agregado el
20 ene., 2009
Proveedor
Descripción
60 x 60 x 15 mm

– Compact fan with low power consumption.
– Some models suitable for use at high ambient temperatures.
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.

– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 28, TR 64. Stripped and tinned ends.
– Blowing over struts. Rotational direction CCW looki
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
2706
Agregado el
20 ene., 2009
Proveedor
Descripción
40 x 40 x 25 mm 

– Highly stable characteristic curve for high air flow with high back pressure.
– Low operating noise at high back pressure.
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.

– Fully integrated electronic commutation.
– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 26, TR 64. Stripped and tinned ends.
– Blowing over struts. Ro
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
1149
Agregado el
20 ene., 2009
Proveedor
Descripción
40 x 40 x 20 mm

– Compact fan with low power consumption.
– Some models suitable for use at high ambient temperatures.
– Material: fiberglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation.

– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 28, TR 64. Stripped and tinned ends.
– Blowing over struts. Rotational direction CCW lookin
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
2561
Agregado el
20 ene., 2009
Proveedor
Descripción
40 x 40 x 10 mm

– Compact fan with low power consumption.
– Some models suitable for use at high ambient temperatures.
– Material: fiberglass-reinforced plastic. impeller PA, housing PBT.
– Fully integrated electronic commutation.

– Protected against reverse polarity and blocking.
– Electrical connection via single leads AWG 28, TR 64. Stripped and tinned ends.
– Blowing over struts. Rotational direction CCW looki
Manejado por
SolidComponentsTM
¿Configuraciones?
Desconocido
Descargas
3210
Agregado el
20 ene., 2009

Información del contacto

Dirección:
Äggelundavägen 2
Järfälla, 175 62
Sweden
Teléfono: +46 10 454 44 00
Correo electrónico:
Sitio Web: www.ebmpapst.se